Agency Arms Benelli M2 Compatible MLOK Handguard

The Benelli M2 compatible MLOK® handguard is machined from 6063 aluminum. It is 9.375" in length and weighs in at 8.8 ounces fully assembled. The handguard features 38 full size MLOK® attachment slots and 9 additional partial MLOK® attachment...

Taran Tactical TTI Benelli Follower

Low friction anodized aluminum shotgun follower, Designed to minimize follower jamming within the tube. Anodized aluminum helps the follower slide smoothly within the tube.

S&J Hardware Beretta 1301 Extension (+2 Canadian Legal)

This magazine tube has been modified to meet Canadian capacity requirements This tube will fit flush with an 18.5″ barreled Beretta 1301 12 gauge shotgun. This will allow one round of 3″ shells or two rounds of 2 3/4″inch CNC...

Nordic Components Beretta 1301 Tactical MXT Extension Kit

Beretta 1301 extension kit in a single package for Tactical model. Features MXT magazine extension designed exclusively for the 1301 Tactical Beretta 1301 extension increases magazine capacity to 7 rounds (capacity determined with 2 3/4″ shells...

Nordic Components 12 Gauge Benelli Nova/Supernova, Beretta and CZ Extension Nut

Expand your magazine capacity with a Nordic Components extension nut and tube kit. The BR-model nut is compatible with the following 12 gauge shotguns: Benelli Nova and Supernova< Beretta 1301 Competition and Tactical Beretta 391 Xtrema and...

Nordic Components 12 Gauge MXT Extension Tube Only (12 gauge)

Nordic Components MXT magazine extension tube. MUST PURCHASE COMPATIBLE MXT NUT MXT extension tube for changing magazine extension length and capacity Available in variety of lengths, from +1 to +9 (shell capacity measured with 2 3/4″ shells...

Nordic Components 12 Gauge Benelli M1/M2, SBE 1/2/3, and Breda Auto Extension Nut

The MXT extension nut allows for installation of a Nordic Components MXT 12ga shotgun extension tube kit. The nut replaces the factory magazine cap, and is required for installation of the extension tube kit. The BN-model nut is compatible with the...

Nordic Components 12 Gauge Mossberg Extension Nut

Expand your magazine capacity with a Nordic Components extension nut and tube kit. The MB-model nut is compatible with the following 12 gauge shotguns: Mossberg 590/590A1 Mossberg 835 Mossberg 930 Mossberg 935 Tristar TEC-12 (requires spacer...

Nordic Components 12 Gauge Winchester/FN/Browning Auto Extension Nut (Winchester SX2/3/4, FN SLP, Browning Gold/Silver)

Expand your magazine capacity with a Nordic Components extension nut and tube kit. The SX-model nut is compatible with the following 12 gauge shotguns: Winchester SX2, SX3, and SX4 FN SLP and SLP Mk. 1 Browning Gold – Note: Due to issues with...

Nordic Components Picatinny Rail for Barrel Clamp

Maximize the versatility and utility of your Nordic Components barrel clamp with this Picatinny rail attachment. This rail features enough real estate for mounting lights and other accessories, but takes up no more space than the width of the clamp...

J Kenny & Co Auto-Loading Lifter - Benelli M2

Get the edge over your competitors Developed by former world champion Josh Kenny, our lifter allows you to begin loading directly into the magazine tube, from empty. Even if the bolt is locked back, load directly into the magazine tube. The first...

J Kenny & Co Auto-Loading Lifter - Beretta 1301

Get the edge over your competitors Developed by former world champion Josh Kenny, our lifter allows you to begin loading directly into the magazine tube, from empty. Even if the bolt is locked back, load directly into the magazine tube. The first...

J Kenny & Co Auto-Loading Lifter - Remington Versa Max

Get the edge over your competitors Developed by former world champion Josh Kenny, our lifter allows you to begin loading directly into the magazine tube, from empty. Even if the bolt is locked back, load directly into the magazine tube. The first...

Nordic Components 12 Gauge Stoeger M3000-Series Extension Nut

The MXT extension nut allows for installation of a Nordic Components MXT 12ga shotgun extension tube kit. The nut replaces the factory magazine cap, and is required for installation of the extension tube kit. The M3000-model nut is compatible with the...

Nordic Components 12 Gauge Winchester Extension Nut (Winchester 120/1200/1300, Stevens 320)

If you’re looking for more capacity, this 12 gauge Winchester extension nut is half the equation, allowing installation of a Nordic Components 12ga shotgun extension tube kit on your 12 gauge Winchester or Stevens shotgun. The nut is required for...

Nordic Components MXT 12 Gauge Tube Extension Kit +8

MXT shotgun magazine extension tube kit for increasing magazine capacity. Used in conjunction with the MXT extension tube nut, this tube kit will add the stated number of rounds to your existing magazine capacity. All capacities are measured using 2...

Nordic Components MXT 12 Gauge Tube Extension Kit +5

MXT shotgun magazine extension tube kit for increasing magazine capacity. Used in conjunction with the MXT extension tube nut, this tube kit will add the stated number of rounds to your existing magazine capacity. All capacities are measured using 2...

Nordic Components MXT 12 Gauge Tube Extension Kit +2

MXT shotgun magazine extension tube kit for increasing magazine capacity. Used in conjunction with the MXT extension tube nut, this tube kit will add the stated number of rounds to your existing magazine capacity. All capacities are measured using 2...

Nordic Components MXT 12 Gauge Tube Extension Kit +1

MXT shotgun magazine extension tube kit for increasing magazine capacity. Used in conjunction with the MXT extension tube nut, this tube kit will add the stated number of rounds to your existing magazine capacity. All capacities are measured using 2...

Precision Armament Remington 870 Tennalum 7068 Shotgun Scope Rail

An Ultra-Light Tactical Shotgun Rail with Steel Surpassing Strength. Attach holographic, red dot, or other sights and accessories to your tactical shotgun without adding excessive weight. Precision machined to exact MIL-STD 1913 tolerances from a billet...

Nordic Components Beretta 1301 Tactical Barrel Clamp

Modular when you need it to be and durable 24/7, a Nordic clamp adds strength and flexibility to your MXT extension. Everyone knows the most important trait of a tactical/defensive firearm is reliability. Our MXT extension tubes are built for hard use,...

Nordic Components Standard Barrel Clamp with Picatinny Rail, 12ga.

Modular when you need it to be and durable 24/7, a Nordic clamp adds strength and flexibility to your MXT extension.Nordic extension tubes are tough, but some situations just require some extra support. Whether it’s just there to provide a place to...

Nordic Components Heavy-Wall (Mossberg) Barrel Clamp with Picatinny Rail, 12ga.

Keep it all together with a Nordic barrel clamp. Modular when you need it to be and durable 24/7, a Nordic clamp adds strength and flexibility to your MXT extension. Nordic extension tubes are tough, but some situations just require some extra support...

Nordic Components MXT 12 Gauge Tube Extension Kit +4

MXT shotgun magazine extension tube kit for increasing magazine capacity. Used in conjunction with the MXT extension tube nut, this tube kit will add the stated number of rounds to your existing magazine capacity. All capacities are measured using 2...

Nordic Components MXT 12 Gauge Tube Extension Kit +7

MXT shotgun magazine extension tube kit for increasing magazine capacity. Used in conjunction with the MXT extension tube nut, this tube kit will add the stated number of rounds to your existing magazine capacity. All capacities are measured using 2...

Nordic Components 12 Gauge Remington Extension Nut

The MXT extension nut allows for installation of a Nordic Components MXT 12ga shotgun extension tube kit. The nut replaces the factory magazine cap, and is required for installation of the extension tube kit. The RM-model nut is compatible with the...

Nordic Components 12 Gauge Stoeger M2000 and Franchi Intensity/Affinity Extension Nut

The MXT extension nut allows for installation of a Nordic Components MXT 12ga shotgun extension tube kit. The nut replaces the factory magazine cap, and is required for installation of the extension tube kit. The ST-model nut is compatible with the...

Nordic Components 12 Gauge Winchester SXP Extension Nut

Expand your magazine capacity with a Nordic Components extension nut and tube kit. If you’re looking for more capacity, this 12 gauge Winchester SXP extension nut is half the equation, allowing installation of a Nordic Components 12ga shotgun...

Nordic Components 12 Gauge Browning Auto-5/BPS Extension Nut

The MXT extension nut allows for installation of a Nordic Components MXT 12ga shotgun extension tube kit. The nut replaces the factory magazine cap, and is required for installation of the extension tube kit. The BP-model nut is compatible with the...

Nordic Components 12 Gauge Browning A5 Extension Nut

The MXT extension nut allows for installation of a Nordic Components MXT 12ga shotgun extension tube kit. The nut replaces the factory magazine cap, and is required for installation of the extension tube kit. The NA5-model nut is compatible with the...

Nordic Components 12 Gauge Heavy Duty Extension Tube Spring

Replacement spring for shotgun magazine extensions. Spring has extra length to allow fitting to magazine Ships coiled in package with instructions for determining length and cutting Available in heavy-duty strengths for 12ga Recommended for...

Taran Tactical TTI Benelli Oversized Ultimate Safety - Black

TTI Oversized Benelli M2/M1 Speed Safety. Fits Benelli 12 and 20 gauge M1,M2,M3,M4, Super Black Eagle, Montefeltro, and Remington Versa Max This safety was designed to be the ultimate extended safety for Three Gun Competition and Tactical shotguns where...

Taran Tactical TTI Ultimate Benelli Power Pack Spring Set

The TTI Ultimate Benelli Power Pak Spring Set comes with the: Ultimate Reduced-Power Buffer Spring. Ultimate Reduced-Power Hammer Spring. Ultimate Reduced Power Trigger Spring and additional C-Clips.

Taran Tactical TTI Benelli M4 Ultimate Charging Handle

The TTI Ultimate Charging Handle is designed by Taran Butler to be the perfect size and feel, with its unique knurling and serrations, to function during high-speed Tactical operations and 3-Gun competitions. It is machined from billet stainless steel...

Taran Tactical TTI Benelli M2 Ultimate Charging Handle

The product weighs 1oz, and is designed to work with 12 gauge shotguns. Our M2 charging handle looks identical to the one provided in the SBE, and should be co-compatible. The TTI Ultimate Charging Handle was designed by Taran Butler to be the perfect...

Taran Tactical TTI Benelli AccuGuide Extended Carrier

**Our Extended Carrier is specifically designed for 12 gauge M1/M2/M3/M4 Benelli Shotguns. Anything else will not be compatible without welding.** Compatible with RIGHT handed 12 gauge: Drops in Benelli M1/M2. Product will fit on the following models...