Canada's Source for Tactical Firearms Parts
Cart 0

BCM Gunfighter Mod 3 KeyMod Vertical Grip - Canadian Tactical Cowboy Supplies - CTCSupplies.ca

BCM

BCM Gunfighter Mod 3 KeyMod Vertical Grip

$32.99
SKU: BCM-VG-KM-MOD-3-FDE

Direct Attach to KeyMod™ Version
  • Low-profile length for increased mobility and decreased “snag” factor.
  • The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
  • Can be mounted in reverse angle to increase control when grabbing handguard and grip.
  • Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
  • Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.
  • Made in the U.S.A., manufactured from high quality, impact resistant polymers.
Tools needed: T15 Torx Driver (not supplied)
  • Insert tool (T15 Torx™ driver) into the screw from under the BCM® KeyMod™ Vertical Grip
  • Push tool into the screw to extend the KeyMod™ anchor, making it protrude from the top.
  • Align the anchors in the two selected large holes of the desired KeyMod™ slots. Grip can be installed in your desired orientation, angled forward or back.
  • After the anchor is inserted, slide the BCM® Vertical Grip forward until it travels no further.
  • Push the BCM Vertical Grip against rail, engaging the accessory’s recoil lugs to the intersecting KeyMod™ opening.
  • With the recoil lugs engaged, tighten the screw to snug the anchor (approximately 40 Inch-lbs. plus quarter turn).
  • Ensure there is no wiggle or forward/backward movement once tight.

*Blue thread locker may be used on threaded fasteners

Share this Product


More from this collection