Killer Innovations Velocity Magwell for Sig P320

The Velocity Magwell will give you an instant feeling of quality and control! Compatible with: The Sig P320 small, medium and large XCARRY Grip Modules Our Velocity Sig P320 Magwell can only be used with our Velocity Basepad for P320 or our Velocity...

Killer Innovations Velocity Basepad for Sig 320 - Black

The oversized lip around the magazine extends past the recessed area on the mag-well just enough to provide a positive purchase on the magazine. The serrated texture on the sides provide enough traction to confidently load and unload the magazine, even...

HB Industries CZ P10 Theta Trigger Kit - Tungsten

The Theta trigger for the CZ P10 is a flat faced trigger that reduces pre-travel take up by 4mm with respect to the factory trigger. There are no adjustable screws or failure points, the pre-travel reduction is achieved through solid geometry that is...

Apex Tactical 9mm Threaded Barrel for FN 509

This is the perfect upgrade for your pistol—make it suppressor ready! The Apex Threaded Barrels are machined from premium cold hammer stainless steel barrel blanks and feature a 1:10” twist rate and a 1/2-28 thread pattern. Barrels are heat...

Strike Industries GEN 3 Magwell for Glock 17/22/34

Introducing the Strike Industries Gen. 3 Magwell for GLOCK™ 17! Our Gen 3 Magwell was designed to provide easier reloading of the magazine while adding a stylish look. Compatible with most aftermarket magazine base plates and extensions. (Aso...

Strike Industries GEN 4 Magwell for Glock 17/22/34

The Strike Industries GEN4 Magwell for GLOCK™ 17 was designed to provide easier reloading of the magazine while adding SI styling. Keeping to the slender factory design of the pistol grip, the benefit of adding a funnel-like magwell to help prevent...

Strike Industries GEN 5 Magwell for Glock 19/23

The Strike Industries GEN5 Magwell for GLOCK™ G19 was designed to provide easier reloading of the magazine while adding SI styling. With the added front lip of the magwell, this SI magwell gives improved grip support. Keeping to the slender factory...

Apex Tactical Action Enhancement Kit for Glock (Gen 3/4 - No Trigger Bar)

If you are leaving the stock trigger behind, then this is the kit you need in your Gen 3/4 Glock. The Action Enhancement Kit features an Apex Action Enhancement Trigger and Apex Performance Connector. This kit does not include a trigger bar and requires...

Apex Tactical Curved Forward Set Trigger Kit for M&P M2.0

Nothing compares to the performance that comes from the patented Apex Forward Set Trigger Kit. This kit is engineered to provide the M&P M2.0 pistol owner with a smooth, consistent trigger pull with the advantages of shorter over-travel and shortened...

Apex Tactical Failure Resistant Extractor for Glock Slim Frame Models

The Apex Failure Resistant Extractor for Glock® pistols is designed with a more robust extractor claw, as well as improved geometry, to produce a more durable extractor that will deliver consistent extraction and a more uniform ejection pattern...

Apex Tactical Failure Resistant Extractor for Sig Sauer P320

The Apex Failure Resistant Extractor for Sig Sauer P320 pistols is designed with a more robust extractor claw, as well as improved geometry, to produce a more durable extractor that will deliver consistent extraction and a more uniform ejection pattern...

Apex Tactical Failure Resistant Extractor for M&P 2.0

The Apex Failure Resistant Extractor is designed to ensure consistent and reliable extraction under the most adverse conditions. Machined from a billet of heat-treated stainless steel, the critical engagement surface features Apex’s custom...

Apex M&P Polymer Action Enhancement Trigger Kit for M&P

The Action Enhancement Trigger Kit is engineered to provide the M&P (9mm or .40S&W) pistol owner with a smooth, consistent 5.0 to 5.5 lbs. trigger pull with the advantages of shorter over-travel and shortened trigger reset. All of the components...

Faxon Sig P320 Compact Flame Fluted Barrel, Threaded, TiN PVD

Why Faxon Pistol Barrels? 4150 or 416-R Stainless - Only the best steels for durability, longevity, and accuracy. 9mm SAAMI Chambers - Superior accuracy with complete SAAMI compatibility & boring reliability. Tighter Tolerances - Drop-in, yet...

Nomad Defense Lower Parts Kit for G19 Gen4/5, Complete, with Trigger

The Nomad Defense lower parts kit (LPK) is a complete kit that will allow you to build out your Nomad Defense stripped pistol lower. This kit gets a hybrid designation, as it is designed to be cross-generational between Gen4 and Gen5 G19 pistols...

Arms Republic 9mm Compensator for Glock Gen 4 – Black

The Arms Republic compensator utilizes a single top port design which maximizes the effectiveness of the compensator in reducing muzzle rise and resulting in faster and more accurate follow up shots. Specifications: Compatibility: All Glock Gen 4,...

Arms Republic 9mm Compensator for CZ P-10 – Black

The Arms Republic compensator utilizes a single top port design which maximizes the effectiveness of the compensator in reducing muzzle rise and resulting in faster and more accurate follow up shots. Specifications: Compatibility: CZ P-10...

Faxon Sig P320 Fullsize Flame Fluted Barrel, Threaded

Why Faxon Pistol Barrels? 4150 or 416-R Stainless - Only the best steels for durability, longevity, and accuracy. 9mm SAAMI Chambers - Superior accuracy with complete SAAMI compatibility & boring reliability. Tighter Tolerances - Drop-in, yet...

Apex Tactical Enhanced Slide Release for CZ P-10

What It Does The Apex CZ P-10 Enhanced Slide Release offers wider, more ergonomic thumb paddles for easier manipulation of the slide release. CNC machined from steel and black Melonite finished For Use In These Guns For use in the CZ P-10 C, F...

Polymer 80 PF320PTEX P320 Grip Module

PF320PTEX Grip Module The PF320PTEX Grip Module is P80’s first polymer grip designed for compatibility with SIG SAUER components for P320. Designed and manufactured in the U.S.A., the PF320PTEX Grip Modules are made with P80’s proprietary...

Phoenix Trinity 2011 EVO Grip w/ Mag Release Double Undercut Trigger Guard (Aggressive Texture) 17-4 Stainless

THE EVO GRIP The EVO Grip is known around the country for being the best hi-cap modular grips. Many end up purchasing an EVO Grip for their setup based off of word of mouth alone. Afterall, when you hear everybody and their grandma talking about EVO...

Phoenix Trinity 2011 EVO Grip w/ Mag Release (Aggressive Texture) 17-4 Stainless

THE EVO GRIP The EVO Grip is known around the country for being the best hi-cap modular grips. Many end up purchasing an EVO Grip for their setup based off of word of mouth alone. Afterall, when you hear everybody and their grandma talking about EVO...

Atlas Gunworks 5-Inch Type 0 9mm Slide

Atlas Gunworks Type 0 Slide Unique full profile Bushing cut Description: Bald Sight Cut Front: None Sight Cut Rear: None Optics Cut: None Serrations: None Length: cut for 5" barrel Weight: 13.5 oz Caliber: 9mm

Apex 9mm Threaded Barrel for SD and SDVE

This is the perfect upgrade for your pistol—make it suppressor ready! The Apex Threaded Barrel for SD9 and SD9VE is machined from premium cold hammer stainless steel barrel blanks and features a 1:10” twist rate and a 1/2-28 thread pattern...

Faxon Sig P320 Compact Flame Fluted Barrel, Threaded

Why Faxon Pistol Barrels? 4150 or 416-R Stainless - Only the best steels for durability, longevity, and accuracy. 9mm SAAMI Chambers - Superior accuracy with complete SAAMI compatibility & boring reliability. Tighter Tolerances - Drop-in, yet...

Apex Tactical J-Plate Base Pad for Magpul Glock Mags

The Apex® J-Plate directly replaces the factory base pad on the Magpul® GL9 PMAG™ for Glock® and features laser marked identification dots for easy identification. This part will: Utilize the factory retention plate Add...

Faxon Sig P320 Fullsize Flame Fluted Barrel, Non-Threaded

Why Faxon Pistol Barrels? 4150 or 416-R Stainless - Only the best steels for durability, longevity, and accuracy. 9mm SAAMI Chambers - Superior accuracy with complete SAAMI compatibility & boring reliability. Tighter Tolerances - Drop-in, yet...

Apex Tactical Action Enhancement Kit for Gen 5 Glock Pistols

What It DoesThe Action Enhancement Kit for Gen 5 Glock pistols features the Apex Action Enhancement Trigger, with Gen 5 Apex Trigger Bar, and Apex Performance Connector*. The kit is a direct drop-in replacement of the factory polymer trigger and...

HB Industries CZ P10 Extended Magazine Release, Reversible

Extended magazine release for all CZ P10 S/C/F models with reversible magazine catches. This magazine release is extended by 1.5mm, yielding a very subtle and effective control improvement. Parts are machined from solid 4140 chromoly, heat treated and...

ETS Glock 19 9mm - Limited 10-round Magazine

MAG FEATURES Fits the Glock 19 and 26 Compatible with Gen 1 through Gen 5 Glocks Limited 10-round capacity Compatible with Glock and aftermarket floorplates Easy disassembly with our specially designed baseplate Ergonomically designed floorplate...

Magpul GL Enhanced Magazine Well for Glock 17 Gen 4

The Magpul GL Enhanced Magazine Well is a high performance purpose built Glock frame magazine well. Designed to fully enhance and ensure positive magazine insertion in high stress scenarios. Sleek and ergonomic design features also provide excellent...

Apex Tactical SD Spring Kit

What It Does The Apex SD Spring Kit produces a smoother trigger pull and improved reset and is designed for Duty/Carry use. The kit works as a stand-alone or in conjunction with the Apex SD Polymer Action Enhancement Trigger. Expected...

Apex Reset Assist Mechanism (RAM)

What It Does The patented Apex Reset Assist Mechanism (U.S. Patent No. 8,510,980) is a drop in part engineered to improve tactile trigger reset of the M&P pistol. The RAM is precision machined and heat treated to Apex’s rigid quality control...

Magpul PMAG 21 GL9 Glock 9mm 21/10-Round Magazine

The PMAG 21 GL9 is a 21/10-round Glock 9mm handgun magazine featuring a new proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 140MM competition magazine,...

Apex Tactical Action Enhancement Aluminum Trigger & Duty/Carry Kit for M&P M2.0 (and M&P 45)

What It Does The Apex Action Enhancement Trigger directly replaces the factory hinged trigger with a solid body aluminum trigger, and a center mounted pivoting safety. The rounded face of the trigger provides a smooth comfortable surface for the...

Apex M&P Flat Forward Set Sear & Trigger Kit

Designed to work in any Smith & Wesson M&P model pistol in a centerfire caliber, the Apex Flat Faced Forward Set Trigger Kit reduces trigger pre-travel and over-travel, while allowing the shooter to position their finger at an increased leverage...