Primary Arms SLx RS-10 1x23mm Mini Reflex Sight - 3 MOA Dot

After rigorous field testing, this optic has been given a silver-tier rating by the National Tactical Officers Association. This red dot sight is part of our SLx optics line. SLx optics built our reputation for innovation, reliability and value. All SLx...

Primary Arms Holosun HE509-RD Enclosed Solar Powered Red Dot Sight w/ MOS Mounting Plate - ACSS Vulcan Reticle

A lot of shooters and gun owners who purchased or built their handgun from the ground up use the tried and true three dot iron sight arrangement. Many of us spend plenty of time at the range attempting to achieve better shot placement. While three dot...

Primary Arms SLx FS Flip-to-Side Magnifier Mount - 2 Bolt Bottom Interface

The Primary Arms Flip to Side Magnifier Mount is perfect for placing a 2-bolt magnifier behind all Primary Arms Red Dots and 1x MicroPrism, and other red dots as well. This mount places the center of the magnifier at either Absolute or Lower 1/3rd...

Primary Arms SLx 3X MicroPrism with Red Illuminated ACSS Raptor 5.56/.308 Reticle - Yard

After rigorous field testing, this optic has been given a silver-tier rating by the National Tactical Officers Association. This MicroPrism is part of our SLx optics line. SLx optics built our reputation for innovation, reliability and value. All SLx...

Midwest Industries Marlin 1895 Extended M-LOK Sight System

Fits Marlin® 1895 variants Heavy-duty ghost ring for fast target acquisition Wide windage and elevation adjustment range for use with different ammunition Midwest Industries sight adjustment tool included Steel rear aperture and front sight...

Midwest Industries Marlin 1895 Ghost Ring rail

Heavy-duty ghost ring for fast target acquisition Features 4” Picatinny rail section or T2 Specific Base Wide windage and elevation adjustment range for use with different ammunition Midwest Industries sight adjustment tool...

Midwest Industries Marlin 1894 Ghost Ring rail

Heavy-duty ghost ring for fast target acquisition Features 2.25” Picatinny rail section or T2 Specific Base Wide windage and elevation adjustment range for use with different ammunition Midwest Industries sight adjustment tool...

SLR Rifleworks SR30 Dual Port Brake

SR30 Dual Port Brake 5/8-24 Threading .30 caliber 416 SS Black Melonite Finish Extreme Muzzle Control

Rainier Arms 9mm Linear Mini Brake - 1/2x28

Introducing our Rainier Arms 9mm linear compensator. The linear Comp is designed for the shooter that wants to keep the blast and concussion and flames forward. This small compact unit does the same as the much larger ones at a quarter of the size...

Killer Innovations Velocity Magwell for Sig P320

The Velocity Magwell will give you an instant feeling of quality and control! Compatible with: The Sig P320 small, medium and large XCARRY Grip Modules Our Velocity Sig P320 Magwell can only be used with our Velocity Basepad for P320 or our Velocity...

Killer Innovations Velocity Basepad for Sig 320 - Black

The oversized lip around the magazine extends past the recessed area on the mag-well just enough to provide a positive purchase on the magazine. The serrated texture on the sides provide enough traction to confidently load and unload the magazine, even...

HB Industries CZ Bren 2 MS 7.62×39 AR Magwell Conversion

Magwell conversion for your 7.62×39 CZ Bren 2 pistol or rifle to accept standard AR pattern 7.62×39 magazines. The conversion utilizes the same insert found in the 556 Bren 2 MS models, along with a Delrin pin to facilitate take down and...

HB Industries CZ Bren 2 Handguard 10.8" M-Lok (GEN 2)

Our Gen 2 handguards your CZ Bren 2 MS feature a window at the gas block that has been carefully designed to allow operator access to gas system adjustments while in use. The gas block window is bridged with a removable 1913 plate. With the 1913 plate...

HB Industries CZ Bren 2 Handguard 7.8" M-Lok

HBI handguards for your CZ Bren 2 MS pistol or rifle. This 7.8″ handguard is universally compatible with all 8″, 9″, 11″, and 14″ barrel Bren 2 MS models in both 556/223 and 7.62×39 calibers. Our 7.8″ handguards...

HB Industries B&T GHM9 Slim Forend Grip Panel - Pair

This Grip Panel is designed to replace the picatinny/1913 rail section on one or both sides of your Gen1 or Gen2 B&T GHM9 and GHM45. Our Slim Grip Panels are 3.4mm thick (B&T picatinny rail is 7mm thick) and are profiled to provide great traction...

HB Industries B&T APC and GHM9 Surefire M300 Light Mount

We designed this dedicated mount to marry the Surefire M300 Rail Mount light to the B&T APC and GHM9/45 Gen1 receivers in the simplest, strongest, most elegant and ergonomic manner possible. The mount is machined from solid 6061-T6 aluminum and hard...

HB Industries CZ Bren 2 1913 Stock/Brace Adapter

1913/Picatinny/Sig type stock or arm brace adapter for your CZ Bren 2. Our adapter is low profile and integrates any 1913 type stock or brace directly to the upper receiver of the Bren 2. The adapter is secured to the upper receiver using a single T25...

HB Industries CZ Bren 2 HK G36 Stock Adapter Kit

Seamlessly adapt the HK G36 folding stock to your CZ Bren 2 (fits both 2S and 2MS). Our machined aluminum stock adapter and high performance polymer shell deflector weight 1oz less than the CZ factory folding stocks and make this one of the cleanest and...

HB Industries CZ Bren 2 Trigger - Black

HBI drop in trigger for the CZ Bren 2. Our flat faced trigger for the Bren 2 reduces take-up by over 35% and nearly eliminates over-travel after the sear releases the hammer. We machine our Bren 2 trigger to fit both the lower receiver and the...

HB Industries CZ Bren 2 Offset Charging Handle (Optics) - Right - Black

Our Offset Charging Handle for the CZ Bren 2 is extended and offset at a downward angle from the receiver in order to provide additional clearance between mounted optics and your fingers. The factory charging handle assembly on the Bren is dynamic in...

HB Industries CZ Bren 2 Offset Charging Handle (Optics) - Left- Black

Our Offset Charging Handle for the CZ Bren 2 is extended and offset at a downward angle from the receiver in order to provide additional clearance between mounted optics and your fingers. The factory charging handle assembly on the Bren is dynamic in...

HB Industries CZ Bren 2 High Load Gas Piston Spring

Our High Load spring for the CZ Bren 2S and 2MS gas piston is designed to reduce the bolt velocity on both “1 – Normal” and “2 – Adverse” gas system settings. By increasing both the pre-load and spring rate acting on...

HB Industries CZ Bren 2 Extended Safety Selectors (Pair)

Drop in Extended Safety Selectors for your CZ Bren 2. Our safety selectors feature large finger pads extended by 3mm with an aggressive rib texture; the increased surface area in turn reduces the amount of pressure needed to throw the selectors. The ribs...

HB Industries CZ Bren 2 Extended Charging Handle

Our Drop in Charging Handle for the CZ Bren 2 is extended in length by 3.5mm, and the height/width is increased 2.1mm. More importantly than the dimensional changes is HOW the geometry was changed. The factory charging handle assembly on the Bren is...

HB Industries B&T Safety Selector Delete, Right

Use this drop in Safety Delete to correctly remove the intrusive factory safety on the right side of your Brügger & Thomet GHM or APC receiver. Fits many models including GHM9, GHM45, APC9, APC45, APC223, and APC300. Designed specifically for...

HB Industries B&T Modular Safety Selector Kit for APC, GHM, SPC

Our modular safety selector kit is the ultimate safety upgrade for your B&T APC, GHM, or SPC. The kit contains an upgraded selector center shaft, two (2) selector levers, and one (1) selector delete. Using our kit you can elect to run the selector...

Strike Industries LITE Slide for Glock 19 Gen 3 Black

The Strike Industries LITESLIDE for GLOCK™ G19 GEN3 was created with optimal accuracy and performance in mind, perfect for any upgrade or new custom build. Made in the USA from machined billet 17-4 Stainless Steel using clockwork precision to...

Killer Innovations Sig P320C Velocity Threaded Barrel (Black DLC)

PRECISION MACHINING Using exceptionally high-grade material and precision machining every feature in one proprietary process, our barrels deliver unparalleled accuracy and performance. Every barrel is machined with an 11° target crown for greater...

Magpul PC Backpacker Stock - Ruger PC Carbine

The Magpul PC Backpacker Stock for the Ruger® PC Carbine™ is the ultimate option for those wanting to bring advanced ergonomics and portability to their Ruger PC Carbine rifle. With a similar look and functionality as our X-22 Backpacker stock,...

Apex Tactical Mass Driver Hammer Kit for S&W K/L-Frame Revolvers

Originally designed to improve ignition of 22 Rimfire ammunition, the Apex Mass Driver Hammer is now for use in a variety of rimfire and centerfire Smith & Wesson revolvers. The design increases the mass behind the hammer's impact surface, allowing...

Killer Innovations CZ P10C Velocity Threaded Barrel (TiN)

PRECISION MACHINING Using exceptionally high-grade material and precision machining every feature in one proprietary process, our barrels deliver unparalleled accuracy and performance. Every barrel is machined with an 11° target crown for greater...

Haga Defense Bren 2 Enhanced Grip Backstrap

Enhanced grip backstrap for the Bren 2. Larger in size than the factory backstrap providing a more comfortable grip for most shooters. Especially those with larger hands. The overlay below shows in red the Haga Defense backstrap verses the factory part...

Magpul QR Rail Grabber – 17S Style Adapter for RRS/ARCA & Picatinny Rails

The Magpul QR Rail Grabber provides a compact, user-adjustable, true quick-release plate that’s compatible with a wide variety of products that use the A.R.M.S ® 17S style footprint. Developed primarily for our Magpul Bipods, the Bipod QR...

Primary Arms SLx 3X Micro Magnifier

The SLx 3x MicroMagnifier is an exciting approach at optical magnifiers, combining high-clarity 3x magnification with a miniaturized body. This new optic is part of Primary Arms’ SLx line. SLx optics built Primary Arms Optics’ reputation for...

Primary Arms SLx 3X Micro Magnifier w/ ACSS Pegasus Ranging Reticle

The SLx 3x MicroMagnifier with ACSS Pegasus reticle is an exciting approach at optical magnifiers, combining high-clarity 3x magnification with a miniaturized body and a built-in ranging reticle. This new optic is part of Primary Arms’ SLx line...

Hera Industries Direct Fit Folding Butt Stock - CZ Bren 2

We have put together a great combination of parts to make an excellent bolt-on folding stock for the CZ Bren 2. Using the popular and very high-quality HERA folding mechanism, an LBE buffer tube, and AIM Minimalist Buttstock you get a very comfortable...