Faxon 9mm/350 Legend MuzzLok Ported Flash Hider, Steel, QPQ Nitride

MUZZLOK® Faxon's invented "MuzzLok" feature on this device allows for easy timing and installation of your device without the need for a crush washer or shims. By using the extension nut to adjust the length of the device, you can adjust the...

AR-15 A2 9mm Flash Hider Assembly (1/2x36)

Machined steel, five-port flash suppressor effectively controls muzzle flash to minimize shooter exposure in both daytime and low-light situations. Ports are located along the top of the suppressor and bottom is solid to reduce dust printing when...

SLR Rifleworks SR30 Dual Port Brake

SR30 Dual Port Brake 5/8-24 Threading .30 caliber 416 SS Black Melonite Finish Extreme Muzzle Control

Rainier Arms 9mm Linear Mini Brake - 1/2x28

Introducing our Rainier Arms 9mm linear compensator. The linear Comp is designed for the shooter that wants to keep the blast and concussion and flames forward. This small compact unit does the same as the much larger ones at a quarter of the size...

Strike Industries Slide Adapter Plate (G-SAP) for GLOCK Gen3 to Gen4 for Mass Driver

Adapt a Glock Gen 3 slide to a Gen 4 Glock The Strike Industries Slide Adapter Plate (G-SAP™) allows you to use a GEN3 slide (with or without Mass Driver Comp) on a GEN4 frame. Naturally a GLOCK™ factory or aftermarket GEN3 slide will fit...

Precision Armament Hypertap SLIM 9mm Muzzle Brake (1/2x28) - Matte Black

Developed from the ground up and backed by knowledge gained from years of pushing the edge of muzzle device performance, the Hypertap muzzle brake delivers more than we’ve ever offered before. Our proprietary Hybrid Baffle Design combined with...

Precision Armament Hypertap SLIM 9mm Muzzle Brake (1/2x28) - Matte Stainless

Developed from the ground up and backed by knowledge gained from years of pushing the edge of muzzle device performance, the Hypertap muzzle brake delivers more than we’ve ever offered before. Our proprietary Hybrid Baffle Design combined with...

AR-15 A2 9mm Flash Hider Assembly (1/2x28)

Machined steel, five-port flash suppressor effectively controls muzzle flash to minimize shooter exposure in both daytime and low-light situations. Ports are located along the top of the suppressor and bottom is solid to reduce dust printing when...

AR-10 A2 7.62 Flash Hider Assembly

Machined steel, five-port flash suppressor effectively controls muzzle flash to minimize shooter exposure in both daytime and low-light situations. Ports are located along the top of the suppressor and bottom is solid to reduce dust printing when...

Strike Industries GEN4 Mass Driver Comp - G19

The Strike Industries Mass Driver Compensator represents a quantum leap in compensator design. Current designs have largely been unchanged since the 1930s. It’s about time for something revolutionary. The Mass Driver name is inspired by the idea of...

Strike Industries G4 Mass Driver Comp - G17

The Strike Industries Mass Driver Compensator (MDC) represents a quantum leap in compensator design. Current designs have largely been unchanged since the 1930s. It’s about time for something revolutionary. The Mass Driver name is inspired by the...

Precision Armament M4 Shoulderless Thread Adapter

M4 SHOULDERLESS THREAD ADAPTER ALLOWS CONCEALED ATTACHMENT OF 5/8-24 MUZZLE-DEVICES TO ANY 1/2" BARREL THREAD. Simple shoulder-less design allows thread adapter to remain fully concealed under muzzle device for a continuous, streamline look. Muzzle...

Tyrant Designs Uni-Comp 9mm Universal Compensator (1/2x28)

The Tyrant Designs CNC Universal fit 9mm Compensator, known as the Uni-Comp, has been designed to fit any ½-28 threaded 9mm barrel! Whether you own a Smith and Wesson, Glock, Sig Sauer, CZ, Walther, or ANY other 9mm firearm! The Uni-Comp...

HB Industries 9mm Micro Comp + Thread Protector

An extremely versatile thread protector for your 9mm pistol, rifle, or SBR. Our 9mm Micro Comp + Thread Protector is designed to be short, lightweight, and 100% functional as both a compensator and thread protector. The backbore and radial porting create...

Strike Industries GEN3 Mass Driver Comp - G17

The Strike Industries Mass Driver Compensator represents a quantum leap in compensator design. Current designs have largely been unchanged since the 1930s. It’s about time for something revolutionary. The Mass Driver name is inspired by the idea of...

Strike Industries GEN3 Mass Driver Comp - G19

The Strike Industries Mass Driver Compensator represents a quantum leap in compensator design. Current designs have largely been unchanged since the 1930s. It’s about time for something revolutionary. The Mass Driver name is inspired by the idea of...

Precision Armament Hypertap .308 / 7.62mm Muzzle Brake (5/8x24)

Developed from the ground up and backed by knowledge gained from years of pushing the edge of muzzle device performance, the Hypertap muzzle brake delivers more than we’ve ever offered before. Our proprietary Hybrid Baffle Design combined with...

BCM Gunfighter Modular Scout Light Mount (M-LOK Compatible)

Fully ambidextrous: made to mount flush or cantilever off either the left or right side of the rail system. Designed for use with Surefire's Scout Light mounting interface. Multiple mounting holes for ideal rail placement. Designed to mount on the 3...

Fortis Control Shield and Muzzle Brake 5.56 - Bundle Pack

Offering the Control Shield and our Muzzle Brake as a bundle. Order together and save. Control Shield: You breach, shoot a few rounds and then can't hear feedback from your team because you're temporarily deaf from the concussion...

Fortis Muzzle Brake PCC 9MM Nitride - 1/2 x 28 TPI

Our new Fortis Muzzle Brake was inspired by the sharp lines of our brand. Like many of our products, the machining on this brake takes a lot longer than the competition. We take our time to create the very best products out there. Sure, we can make it...

Precision Armament Hypertap .223 / 5.56mm Muzzle Brake (1/2x28)

Developed from the ground up and backed by knowledge gained from years of pushing the edge of muzzle device performance, the Hypertap muzzle brake delivers more than we’ve ever offered before. Our proprietary Hybrid Baffle Design combined with...

Precision Armament - M4-72 Tactical Compensator 7.62mm/.308

Features an innovative reverse venting double baffle design for the highest recoil reduction in its class. Closed bottom construction combined with upward biased venting effectively eliminates both muzzle rise and dust signature. Precision machined from...

Precision Armament - M11 Severe Duty Muzzle Brake 7.62/308

A massive symmetrical blast baffle, combined with two compensated front baffles, redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance. High tolerance class-3 threads...

VG6 Precision Epsilon 556SL

The EPSILON 556SL is the ideal muzzle brake for 14.5" rifle builds. Featuring an outside diameter of .745", the EPSILON 556SL can be pinned and welded to your barrel while still allowing full maintenance and removal of your gas block without having to...

AR-15 A2 Flash Hider Assembly

Machined steel, five-port flash suppressor effectively controls muzzle flash to minimize shooter exposure in both daytime and low-light situations. Ports are located along the top of the suppressor and bottom is solid to reduce dust printing when...

Precision Armament - EFAB Hybrid Muzzle Brake .308/7.62mm

The Ultimate Hybrid Muzzle Device EFAB (Enhanced Flash Arresting Brake) Combines superior muzzle control with effective flash suppression even on barrels as short as 10 inches. Patent Pending EFAB technology uses an innovative configuration of diverging...

Precision Armament AFAB Hybrid Muzzle Brake

Battlefield Performance Without Compromise (Advanced Flash Arresting Brake)Combines the performance of both a dedicated flash hider and a dedicated compensator. Patent-pending AFAB™ technology employs a complex matrix of tiny passageways that slowly...

Crush Washer AR-15

Can be used in place of a peel washer to mount compensator/flashiders. Just place on barrel then thread on comp/flashider and torque to 15-20 ft-lbs, index 0.730" outside diameter

Precision Armament - EFAB Hybrid Muzzle Brake 5.56mm

The Ultimate Hybrid Muzzle Device EFAB (Enhanced Flash Arresting Brake) Combines superior muzzle control with effective flash suppression even on barrels as short as 10 inches. Patent Pending EFAB technology uses an innovative configuration of diverging...

Precision Armament - M11 Severe Duty Muzzle Brake 6.5mm (.264)

A massive symmetrical blast baffle, combined with two compensated front baffles, redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance. High tolerance class-3 threads...

Precision Armament M41 Severe Duty Muzzle Brake 6.5mm / .264

The M41 Severe-Duty Muzzle Brake Provides Maximum Recoil Reduction for Long Range Precision Rifles. Three large axisymmetric baffles, each featuring five helical ports, redirect a massive volume of gas away from the bore axis in a counter-clockwise...

Precision Armament - M11 Severe Duty Muzzle Brake

Description: The M11-SPR (Special Purpose Rifle) is a compact lightweight version of the M11 designed specifically for high precision AR-15 rifles and long range hunting rifles. A large symmetrical blast baffle along with compensated forward baffles...

Precision Armament - M11 Severe Duty Muzzle Brake .338 (8.6mm)

A massive symmetrical blast baffle, combined with two compensated front baffles, redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance. High tolerance class-3 threads...

Precision Armament M41 Spanner Wrench

The M41 Spanner Wrench is designed to provide quick and easy installation and removal of the M41 Severe-Duty Muzzle Brake.  Close fitting design provides the best method of installation to avoid damage or marring.  Square 3/8″ drive...

Precision Armament - Accu Washer Muzzle Alignment

The most precise and easy to use muzzle device alignment system on the market. Simply choose the correct size Accu-Washer™ shim to accurately index your muzzle brake or flash suppressor while maintaining perfect bore alignment. Since only one shim is...

Crush Washer AR-10

Can be used in place of a peel washer to mount compensator/flas hiders For AR10 / .308 AR barrels Just place on barrel then thread on comp/flashider and torque to 15-20 ft-lbs, index 0.730" outside diameter