BCM

BCM(Bravo Company Manufacturing) was founded in 2005 by a veteran United States Marine in Hartland, Wisconsin, where the company maintains its HQ today.
BCM builds weapon systems that are manufactured, reinforced and tested to meet the unforgiving needs of law enforcement, military, security and peace keeping professionals in some of the most high stress environments and situations in the world.
Si Vis Pacem Para Bellum

"If You Wish For Peace; Prepare For War"

  • BCM Gunfighter Grip Mod 0 - Black BCM Gunfighter Grip Mod 0 - Black

    BCM Gunfighter Grip Mod 0 - Black

    The BCM Gun Fighter's Grip (GFG) features Reduced angle for improved ergonomics Hinged trap door offering storage inside the grip with a water resistant rubber gasket Each grip includes both an extended modular insert to close the gap between the...

    $44.99
    Out of stock
  • BCM Gunfighter Grip Mod 0 - FDE

    BCM Gunfighter Grip Mod 0 - FDE

    The BCM Gun Fighter's Grip (GFG) features Reduced angle for improved ergonomics Hinged trap door offering storage inside the grip with a water resistant rubber gasket Each grip includes both an extended modular insert to close the gap between the...

    $44.99
    Out of stock
  • BCM Gunfighter Grip Mod 1 BCM Gunfighter Grip Mod 1

    BCM Gunfighter Grip Mod 1

    The BCM Gun Fighter's Grip (GFG) features Reduced angle for improved ergonomics Hinged trap door offering storage inside the grip with a water resistant rubber gasket Each grip includes both an extended modular insert to close the gap between the...

    $44.99
    Choose Options
  • BCM Gunfighter Grip Mod 2 (Modular) - Black BCM Gunfighter Grip Mod 2 (Modular) - Black

    BCM Gunfighter Grip Mod 2 (Modular) - Black

    The BCM Gun Fighter's Grip (GFG) features   Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips. Same wider profile as the BCM's GUNFIGHTER Grip Mod 3. A new AR15 grip refined for the modern warfighter, optimized...

    $49.99
    Add to Cart
  • BCM Gunfighter Grip Mod 3 BCM Gunfighter Grip Mod 3

    BCM Gunfighter Grip Mod 3

    Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target. The Gun Fighter's Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the...

    $39.99
    Choose Options
  • BCM Gunfighter KAG (M-LOK Compatible) BCM Gunfighter KAG (M-LOK Compatible)

    BCM Gunfighter KAG (M-LOK Compatible)

    Kinesthetic Angled Grip - M-LOK Version The KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry. Designed to...

    $35.99
    Out of stock
  • BCM Gunfighter KAG 1913 Picatinny

    BCM Gunfighter KAG 1913 Picatinny

    The KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry. Designed to complement modern shooting grips, the...

    $35.99
    Add to Cart
  • BCM GUNFIGHTER Mod 0 SOPMOD Stock - Black BCM GUNFIGHTER Mod 0 SOPMOD Stock - Black

    BCM GUNFIGHTER Mod 0 SOPMOD Stock - Black

    Bravo Company introduces the BCMGUNFIGHTER Stock Assembly - Mod 0 - SOPMOD (Widebody). The strongest light-weight polymer stock available for your mil-spec receiver extension is here! More pronounced cheekweld (SOPMOD type) Snag free Design. No...

    $99.99
    Add to Cart
  • BCM Gunfighter Mod 3 Picatinny Vertical Grip BCM Gunfighter Mod 3 Picatinny Vertical Grip

    BCM Gunfighter Mod 3 Picatinny Vertical Grip

    The new Patent Pending BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories. Most of the industry relies on...

    $38.99
    Out of stock
  • BCM GUNFIGHTER Stock BCM GUNFIGHTER Stock

    BCM GUNFIGHTER Stock

    Bravo Company introduces the BCMGUNFIGHTER Stock.The strongest light-weight polymer stock available for your mil-spec receiver extension is here! Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or...

    $94.99
    Choose Options
  • BCM KMR Handguard Installation Kit

    BCM KMR Handguard Installation Kit

    Installation parts to install your BCM KMR (KeyMod Free Float Handguard). Includes: BCM KMR Barrel Nut Wrench KMR Barrel Nut Clamp Blocks Index Plate Cross Bolt Notched Cross Bolt Locking Torx Wrench Blue Thread Locker  ****This kit...

    $74.99
    Add to Cart
  • BCM Low Profile Gas Block (0.625")

    BCM Low Profile Gas Block (0.625")

    BCM Low Profile Gas Block for AR15, M16, M4, M4A1. Machined of steel, phosphate finish, for .625 barrels.   Manufactured within very tight Mil-Spec tolerances on all ID's.   Barrel ID honed after finish per USGI TDP.   Made by...

    $79.99
    Add to Cart
  • BCM Low Profile Gas Block (0.750") BCM Low Profile Gas Block (0.750")

    BCM Low Profile Gas Block (0.750")

    BCM Low Profile Gas Block for AR15, M16, M4, M4A1. Machined of steel, phosphate finish, for .750 barrels.   Manufactured within very tight Mil-Spec tolerances on all ID's.   Barrel ID honed after finish per USGI TDP.   Made by Bravo...

    $79.99
    Out of stock
  • BCM M16 Bolt Carrier Group BCM M16 Bolt Carrier Group

    BCM M16 Bolt Carrier Group

    BCM (MPI) complete bolt carrier group is fully assembled.Bolt carrier group (auto version) for your AR15, M16, or M4. Parkerized exterior and chrome lined inside carrier. Machined to USGI specifications. This M16/M4 carrier includes the proper Mil-Spec...

    $329.99
    Add to Cart
  • BCM MCMR M-LOK Handguard 10-Inch

    BCM MCMR M-LOK Handguard 10-Inch

    Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the MCMR Series of handguards gives the shooter modularity in the M-LOK® platform. This proprietary patented mounting...

    $299.99
    Out of stock
  • BCM MCMR M-LOK Handguard 13-Inch

    BCM MCMR M-LOK Handguard 13-Inch

    Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the MCMR Series of handguards gives the shooter modularity in the M-LOK® platform. This proprietary patented mounting...

    $319.99
    Out of stock
  • BCM MCMR M-LOK Handguard 15-Inch BCM MCMR M-LOK Handguard 15-Inch

    BCM MCMR M-LOK Handguard 15-Inch

    Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the MCMR Series of handguards gives the shooter modularity in the M-LOK® platform. This proprietary patented mounting...

    $339.99
    Add to Cart
  • BCM MCMR M-LOK Handguard 7-Inch

    BCM MCMR M-LOK Handguard 7-Inch

    Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the MCMR Series of handguards gives the shooter modularity in the M-LOK platform. This proprietary patented mounting system...

    $289.99
    Out of stock
  • BCM MCMR M-LOK Handguard 8-Inch BCM MCMR M-LOK Handguard 8-Inch

    BCM MCMR M-LOK Handguard 8-Inch

    Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the MCMR Series of handguards gives the shooter modularity in the M-LOK platform. This proprietary patented mounting system...

    $289.99
    Out of stock
  • BCM MCMR M-LOK Handguard 9-Inch BCM MCMR M-LOK Handguard 9-Inch

    BCM MCMR M-LOK Handguard 9-Inch

    Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the MCMR Series of handguards gives the shooter modularity in the M-LOK platform. This proprietary patented mounting system...

    $299.99
    Out of stock
  • BCM PNT Trigger Assembly AR15 BCM PNT Trigger Assembly AR15

    BCM PNT Trigger Assembly AR15

    BCM PNT™ Trigger Assembly (Polished – Nickel – Teflon) BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six...

    $109.99
    Add to Cart