BCM Extractor Spring Upgrade Kit (Single)

The BCM® Extractor Spring is a heavy coil design made for the increased extractor tension required on many AR15, M4, M16 short barreled rifles. This product also improves the reliability on a...

BCM AR15 Bolt Assembly (HP/MP)

BCM (HPT & MPI) Bolt Assembly The BCM bolt assembly is machined from the correct Milspec Carpenter No. 158 steel, shot peened for increased strength, includes tool steel machined extractor, BCM...

BCM Gunfighter Grip Mod 2 (Modular) - Flat Dark Earth

The BCM Gun Fighter's Grip (GFG) features   Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips. Same wider profile as the BCM's GUNFIGHTER Grip Mod 3. A new...

BCM Gunfighter Picatinny Rail Sling Mount

Fits standard 1913 Picatinny rail interface. Accepts standard QD (quick detachable) push button sling swivels (not included). Non-rotational locking interface. Requires two lugs and one 1913...

BCM BCMGUNFIGHTER Stock Mod 1-SOPMOD-Compartment-Black

Strong and Lightweight for your mil-spec receiver extension. More pronounced cheekweld (SOPMOD type) Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle...

BCM Milspec Carbine Receiver Extension (Buffer Tube) 6 Position

For your AR15, M16, M4. Carbine receiver extension (buffer tube) machined from 7075T6 and manufactured to Mil-Spec dimensions and specifications. Mil-Spec receiver extensions have a slightly...

BCM GUNFIGHTER QD End Plate

BCM® Receiver End Plate with socket for Quick Disconnect (QD) swivel. Machined from steel, and easily accommodates staking. Like all BCM products, Made with pride in the U.S.A.

BCM Gunfighter Modular Scout Light Mount (M-LOK Compatible)

Fully ambidextrous: made to mount flush or cantilever off either the left or right side of the rail system. Designed for use with Surefire's Scout Light mounting interface. Multiple mounting...

BCM SOPMOD Bolt Upgrade/Rebuild Kit

Based on the SOPMOD designed bolt upgrade and rebuild package, this kit is designed to breathe new life into your bolt assembly. The bolt assembly is the heart of your AR15 rifle system and...

BCM M16 Bolt Carrier Group (MPI) - Flat Dark Earth (Ion Bonded)

Stripped carrier is finished in an Ion Bonded Flat Dark Earth. Lowers friction and cleans easier. BCM® (MPI) complete bolt carrier group is fully assembled. (BCG)Bolt carrier group (auto...

BCM Extractor Spring Upgrade Kit (3-Pack)

The BCM Extractor Spring is a heavy coil design made for the increased extractor tension required on many AR15, M4, M16 short barreled rifles. This product also improves the reliability on a standard...

BCM Gunfighter Mod 3 Picatinny Vertical Grip

The new Patent Pending BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand...

BCM Gunfighter KAG (M-LOK Compatible)

Kinesthetic Angled Grip - M-LOK Version The KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons...

BCM Gunfighter Grip Mod 3

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target. The Gun Fighter's Grip by BCM allows for a...

BCM KMR Handguard Installation Kit

Installation parts to install your BCM KMR (KeyMod Free Float Handguard). Includes: BCM KMR Barrel Nut Wrench KMR Barrel Nut Clamp Blocks Index Plate Cross Bolt Notched Cross Bolt...

BCM AR15 Enhanced Lower Parts Kit (LPK) - Black

BCM® Enhanced Lower Parts Kit for your AR15 Lower Receiver This kit includes all the Mil-Spec quality components you have come to expect from BCM, along with some fantastic upgrades to...

BCM Gunfighter Quick Detachable Sling Mount (M-LOK Compatible)

Direct Attach Version Low-profile length for increased mobility and decreased “snag” factor. The forward angle increases the rigidity of the forearm, while providing a more natural...

BCM Gunfighter Grip Mod 0 - Black

The BCM Gun Fighter's Grip (GFG) features Reduced angle for improved ergonomics Hinged trap door offering storage inside the grip with a water resistant rubber gasket Each grip includes both an...

BCM Gunfighter PKMR (Polymer KeyMod Rail) Mid Length

Direct replacement handguard featuring simple "drop in" design. For mil-spec, M4 type AR15's with a mid length gas system and mil-spec front sight base. Natural ergonomics, slim, comfortable and...

BCM Gunfighter 1913 Light Mount Modular (M-LOK Compatible)

Fully ambidextrous: made to mount flush or cantilever off either the left or right side of the rail system. Designed for use with Surefire’s™ Scout Light mounting interface. Multiple...

BCM Low Profile Gas Block (0.750")

BCM Low Profile Gas Block for AR15, M16, M4, M4A1. Machined of steel, phosphate finish, for .750 barrels.   Manufactured within very tight Mil-Spec tolerances on all ID's.   Barrel ID...

BCM GUNFIGHTER Charging Handle (5.56mm/.223) w/ Mod 4B (MEDIUM) Latch

A NEW Charging Handle and Extended Latch System Charging Handle forged from 7075 T6 AluminumHard Coat Anodized per Mil-A-8625F, Type III, Class 2 The Mod 4B latch extends past the main body of the...

BCM Gunfighter Vertical Grip Mod 3 (M-LOK Compatible)

Direct Attach Version Low-profile length for increased mobility and decreased “snag” factor. The forward angle increases the rigidity of the forearm, while providing a more natural...

BCM Gunfighter M-LOK Picatinny Nylon Rail Section - Black

Rail section is made of Lightweight Impact Resistant Polymer   Mounting hardware is made of Corrosion Resistant Stainless Steel Made to the Mil-Standard 1913 Picatinny Arsenal...

BCM KMR Cross Bolts Kit (Set of 2)

Installation cross bolts for your BCM KMR (KeyMod Free Float Handguard). Includes: (1) Cross Bolt Notched (1) Cross Bolt Locking This kit does NOT include the BCM KMR Handguard.

BCM Gunfighter Grip Mod 1

The BCM Gun Fighter's Grip (GFG) features Reduced angle for improved ergonomics Hinged trap door offering storage inside the grip with a water resistant rubber gasket Each grip includes both an...

BCM GUNFIGHTER Charging Handle (5.56mm/.223) w/ Mod 3B (LARGE) Latch

A NEW Charging Handle and Extended Latch System Charging Handle forged from 7075 T6 AluminumHard Coat Anodized per Mil-A-8625F, Type III, Class 2 The Mod 3B latch extends past the main body of the...

BCM M16 Bolt Carrier Group

BCM (MPI) complete bolt carrier group is fully assembled.Bolt carrier group (auto version) for your AR15, M16, or M4. Parkerized exterior and chrome lined inside carrier. Machined to USGI...

BCM PNT Trigger Assembly AR15

BCM PNT™ Trigger Assembly (Polished – Nickel – Teflon) BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while...

BCM Gunfighter 1 Inch Light Mount Mod 0 (M-LOK Compatible)

Fully ambidextrous mounting; either the left or right side of the rail system. Fits majority of popular 1-inch round body tactical light systems. Design to mount on the 1:30 or 10:30...

BCM Stock Hardware Mounting Kit (Mil-Spec) AR15

This kit contains all the necessary parts to mount your Mil-Spec dimension stock assembly to your lower receiver. Receiver Extension - Mil-Spec, 6 position (machined from 7075T6) Receiver End...

BCM Low Profile Gas Block (0.625")

BCM Low Profile Gas Block for AR15, M16, M4, M4A1. Machined of steel, phosphate finish, for .625 barrels.   Manufactured within very tight Mil-Spec tolerances on all ID's.   Barrel...

BCM Gunfighter Grip Mod 2 (Modular) - Black

The BCM Gun Fighter's Grip (GFG) features   Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips. Same wider profile as the BCM's GUNFIGHTER Grip Mod 3. A new...

BCM MCMR M-LOK Handguard 10-Inch

Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the MCMR Series of handguards gives the shooter modularity in the...