AR-15 A2 9mm Flash Hider Assembly (1/2x36)

Machined steel, five-port flash suppressor effectively controls muzzle flash to minimize shooter exposure in both daytime and low-light situations. Ports are located along the top of the suppressor and bottom is solid to reduce dust printing when...

AR-15 A2 9mm Flash Hider Assembly (1/2x28)

Machined steel, five-port flash suppressor effectively controls muzzle flash to minimize shooter exposure in both daytime and low-light situations. Ports are located along the top of the suppressor and bottom is solid to reduce dust printing when...

AR-10 A2 7.62 Flash Hider Assembly

Machined steel, five-port flash suppressor effectively controls muzzle flash to minimize shooter exposure in both daytime and low-light situations. Ports are located along the top of the suppressor and bottom is solid to reduce dust printing when...

BCM Extractor Spring Upgrade Kit (Single)

The BCM® Extractor Spring is a heavy coil design made for the increased extractor tension required on many AR15, M4, M16 short barreled rifles. This product also improves the reliability on a standard 16" and 14.5" carbines.As with all BCM branded...

Faxon 458/ 458 AR15 Bolt, Nitrided

Seeing "MIL-SPEC" as just the starting point, we set out to ensure the best options are available for our demanding customers. Improvements include using 9310 tool steel for the bolt, nitriding the assembly to increase surface hardness, decrease...

Sharps Xtreme Performance 5.56/.223 Rem Bolt (Relia-Bolt) DLC

The Sharps Xtreme Performance Bolt (XPB) in DLC (diamond Like Carbon), is our patented Relia-Bolt™ finished in DLC (Diamond Like Carbon) coating. The redesigned lugs of the Relia-Bolt™ virtually eliminate the most common MSR malfunction; the...

AR-15 Gas Tube - Rifle +2 - 17 1/8"

 AR-15 Gas Tube - Rifle +2 - 17 1/8"   Gas tube roll pin available for purchase separately

BCM Gunfighter Modular Scout Light Mount (M-LOK Compatible)

Fully ambidextrous: made to mount flush or cantilever off either the left or right side of the rail system. Designed for use with Surefire's Scout Light mounting interface. Multiple mounting holes for ideal rail placement. Designed to mount on the 3...

Faxon .625" Ultra Low-Profile Gas Block - Three Set Screws

Perfect for any rail system, these ultra-low profile gas blocks are the ideal companion for Faxon Firearms (or any other) barrels with a standard  diameter gas journal. Made from high-strength steel, all our gas blocks are a matching black luster to...

Midwest Industries HK416/MR556 Handguard, M-LOK, 13.5-inch

Simple installation, direct replacement for HK factory handguard Retains factory barrel nut Mil-spec top rail Seven sides of M-LOK(TM) compatible slots Lightweight, rugged 6061 aluminum construction, mil-spec hard coat anodized Cross bolt...

BCM Extractor Spring Upgrade Kit (3-Pack)

The BCM Extractor Spring is a heavy coil design made for the increased extractor tension required on many AR15, M4, M16 short barreled rifles. This product also improves the reliability on a standard 16" and 14.5" carbines. As with all BCM branded...

SLR Rifleworks 308H Helix 16" Hand Guard - MLOK

16" Exact Top Rail Length 11.8 oz. with barrel nut and hardware Gen 4 DPMS High Profile Mil-Spec Hardcoat Anodize 7075 Barrel nut w/ Hardcoat Anodize Free Floating Design Grade 8 Fasteners Anti Rotation- Anti Slip Design No Special Tools Need...

Magpul MOE SL Hand Guard - Mid-Length

The MOE SL Hand Guard for AR15/M4 firearms with mid-length gas system and A2 font sight* provides modular flexibility with M-LOK® accessory slots in a lightweight, sleek, cost effective design. Designed with versatility in mind, M-LOK slots at the...

Delta Ring Assembly

 AR-15 Delta Ring Assembly This assembly includes 3 parts:  Delta Ring, Weld Spring, and Snap Ring 

AR-15 A2 Flash Hider Assembly

Machined steel, five-port flash suppressor effectively controls muzzle flash to minimize shooter exposure in both daytime and low-light situations. Ports are located along the top of the suppressor and bottom is solid to reduce dust printing when...

Ejection Port Cover Assembly

Complete, prepackaged kits include all the parts you need for specific subassemblies. Saves time and money—no need to hunt down each item individually. Includes cover, hinge pin, spring, and snap ring.

Rainier Arms Match .308 Rifle Gas SDM Fluted DPMS G2 - 22

**Fits Gen2 DPMS short frame guns onlyMany have asked us to build a barrel with the same workmanship as our UltraMatch barrels while keeping it more affordable. We are able to reach our goal by sourcing a very high end barrel blank at an affordable price...

Crush Washer AR-15

Can be used in place of a peel washer to mount compensator/flashiders. Just place on barrel then thread on comp/flashider and torque to 15-20 ft-lbs, index 0.730" outside diameter

Midwest Industries Two Piece M-LOK Drop-In Mid-Length Handguard

Two Piece Drop-In Handguard Incredibly Lightweight (Supplied M-LOK™ compatible Rail adds .5 oz) Weighs 6.6 oz Solid Lock up! Drop-in, no gunsmith installation, installs in minutes like factory handguards! Five anti rotation QD socket...

AR15 A2 Rifle Buffer

Buffer Body Assembly Standard length: 5.910" Weight .3236 pounds = 5.1776 ounces

Magpul CTR/MOE 0.25" Cheek Riser

Clip on cheek riser for the MOE and CTR stocks. Raises cheek weld 1/4 inch in height. This riser is for use on NON AR15/M4 applications as the riser will interfere with charging handle function. Originally designed for M14 carbine stock conversions.Made...

Faxon Match Series 20" Heavy Fluted, 6.5 Creedmoor, 416R, 5R, Nitride, Nickel Teflon Extension

Barrel Material: 416-R Barrel Type: 5R Button Rifled Barrel Caliber: 6.5 Creedmoor Barrel Twist: 1:8 Barrel Length: 20 Barrel Profile: Heavy Fluted Barrel Gas System: Rifle Inside Finish: Salt Bath Nitride Outside Finish: Salt Bath...

DPMS AR15 Spring Kit (60677)

DPMS offers replacement components for the AR-15 that are made to strict military specifications. These high quality components will provide excellent fit and reliable function in your AR series rifle and are perfect for upgrading existing components or...

Gas Tube Roll Pin AR-15

Safely secures the gas tube on your AR.Requires a small hammer and pin punch for removal and installation

Faxon Match Series 20" Big Gunner, 6.5 Creedmoor, 416R, 5R, Nitride, Nickel Teflon Extension

Barrel Material: 416-R Barrel Type: 5R Button Rifled Barrel Caliber: 6.5 Creedmoor Barrel Twist: 1:8 Barrel Length: 20 Barrel Profile: Big Gunner Barrel Gas System: Rifle Inside Finish: Salt Bath Nitride Outside Finish: Salt Bath Nitride Muzzle Thread:...

BCM Gunfighter 1913 Light Mount Modular (M-LOK Compatible)

Fully ambidextrous: made to mount flush or cantilever off either the left or right side of the rail system. Designed for use with Surefire’s™ Scout Light mounting interface. Multiple mounting holes for ideal rail placement. Designed to...

Radian Weapons Raptor-LT Ambidextrous Charging Handle - 7.62mm - AR10/SR25

Meet the newest member of the Radian family: Raptor-LT. Utilizing the same patented ambidextrous functionality as its predecessor, the Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength,...

Strike Industries Charging Handle with Extended Latch

The new ARCH-EL Charging Handle from Strike Industries is a T-6 7075 forged hard anodized charging handle featuring a larger aluminum latch surface that functions with ease in adverse conditions. The SI ARCH-EL featuring the aluminum SI Extended Latch...

AR-15 Charging Handle

6061 aluminium charging handle.  Manufactured to mil-specs. Fits AR15/M16  

Forward Assist Assembly

Replacement components for the AR-15 that are made to strict military specifications. These high quality components will provide excellent fit and reliable function in your AR series rifle and are perfect for upgrading existing components or replacing...

Rainier Arms Avalanche Charging Handle Tactical Latches Only

The Avalanche’s unique interchangeable handles offer a customized look and feel while supporting individual shooting styles, preserving the fast and fluid motion from either their strong side or support side. Note: these are the tactical latches for the...

AR15 Round Handguard Cap

Replacement handguard caps fit mil-spec handguards and military profile barrels.

AR-15 Gas Tube - Pistol - 6.5"

 AR-15 Gas Tube - Pistol - 6.5" Gas tube roll pin available for purchase separately

AR-15 Gas Tube - Carbine - 9.75"

 AR-15 Gas Tube - Carbine - 9.75" Gas tube roll pin available for purchase separately

Barrel Nut

AR-15 Barrel Nut MADE IN USA

AR15 Front Sight Block "F" Marked

High-quality replacement for factory front sight housing includes bayonet lug. Forged from C1137 steel, then heat-treated for superior strength before final machining to military specifications. Ready to accept an A1- or A2-type front sight post,...